Kenwood KAC-6104D Class-D Mono Power Amplifier, Looks and works great.

Amplifiers
1

Please be informed that though it is 600w. It is only 200w rms at 4 ohm. That aside, fantastic for the price if your preparing on running a one entry selection or compact sub.

Fantastic merchandise for an awesome rate. Does the task appropriate and immensely exceeded my anticipations. Even the gurus warned me that a 600w amp couldn’t power my 1200w jbl subwoofer but it did. What amazes me the most is the high-quality of seem.

Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power

  • Enter your model number
    to make sure this fits.
  • Depth:23 cm
  • Height:5.9 cm
  • Width:19.8 cm
  • Weight:1.8 kg
  • Product Type:Amplifier

I could not resist taking the back again off and owning a peak insidevery straightforward to install, with loads of power to push my sub-woofer. Getting classd it operates just about chilly to touch, so is extremely successful. I believe this solution is now discontinued, which is a disgrace. If you can get a single, they are exceptional value for these a fantastic solution.

Particularly what i wished very strong drives sub and stays cold took prolonged time for supply but i’m in the highlands.

Perfectly amazed for the cash it expenditures. I have to confess i was not anticipating the construct quality i noticed in this. I purchased this as a speculative get to see if the amp alone could be applied for comprehensive vary operation and not only sub bass as i’ve been tasked to arrive up with the excellent portable pa system for our choir. By natural means i had to dig all-around within and was shocked at what i found. This is a solitary output not bridge tied loiad, it truly is 2ohm secure and can output 100w rms into an 8 ohm load or 200w rms into a pair of 8 ohm motorists in parallel. The very low go filters are on a daughter board and the website link to the motherboard has a complete selection input. The only way it could have turned out improved is if out was stereo lol. The focus to detail in the layout even has printedmarks on by the board element/website link leads to indfindicate which path the prospects ought to be bent around to, presumably to prevent accidental solder bridges later on in production. Initially time i have seen that in a minimal value customer devicein idea i could get a next one of these and make a btl period splitter daughter board and bridge two of these to get 600w rms into 4ohmspossibly 1200w peak. I did notice in my original research that this amp is however detailed on the kenwood web page so it is very likely it is not a discontinued design.

Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power : Decent powerful amp for a sub. Powers my 1200w pioneer sub without complaint. A few settings to play with and a high level input as well as low make this a universal install.

Brilliant product for an amazing price. Does the job right and immensely exceeded my expectations. Even the professionals warned me that a 600w amp couldn’t power my 1200w jbl subwoofer but it did. What amazes me the most is the quality of sound.
Brilliant product for an amazing price. Does the job right and immensely exceeded my expectations. Even the professionals warned me that a 600w amp couldn’t power my 1200w jbl subwoofer but it did. What amazes me the most is the quality of sound.
Please be aware that although it is 600w. It is only 200w rms at 4 ohm. That aside, good for the price if your planning on running a single entry range or small sub.
Please be aware that although it is 600w. It is only 200w rms at 4 ohm. That aside, good for the price if your planning on running a single entry range or small sub.

This review is from : Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power

Exactly what i wanted very powerful drives sub and stays cold took long time for delivery but i’m in the highlands.

This review is from : Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power

Exactly what i wanted very powerful drives sub and stays cold took long time for delivery but i’m in the highlands.
Runs my 12″ sub very nicely. I have mine running at 2ohms and has been fine for a few months now. Gives a nice punchy bass and is really well priced for the power.
Runs my 12″ sub very nicely. I have mine running at 2ohms and has been fine for a few months now. Gives a nice punchy bass and is really well priced for the power.

This review is from : Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power

Well impressed for the money it costs. I have to admit i was not expecting the build quality i saw in this. I bought this as a speculative buy to see if the amp itself could be used for full range operation and not only sub bass as i’ve been tasked to come up with the ideal portable pa system for our choir. Naturally i had to dig around inside and was shocked at what i found. This is a single output not bridge tied loiad, it’s 2ohm stable and can output 100w rms into an 8 ohm load or 200w rms into a pair of 8 ohm drivers in parallel. The low pass filters are on a daughter board and the link to the motherboard has a full range input. The only way it could have turned out better is if out was stereo lol. The attention to detail in the design even has printedmarks on through the board component/link leads to indfindicate which direction the leads should be bent over towards, presumably to avoid accidental solder bridges later on in production. First time i’ve seen that in a low price consumer devicein theory i could buy a second one of these and make a btl phase splitter daughter board and bridge two of these to get 600w rms into 4ohmspossibly 1200w peak. I did notice in my initial research that this amp is still listed on the kenwood website so it is likely it is not a discontinued model.
Well impressed for the money it costs. I have to admit i was not expecting the build quality i saw in this. I bought this as a speculative buy to see if the amp itself could be used for full range operation and not only sub bass as i’ve been tasked to come up with the ideal portable pa system for our choir. Naturally i had to dig around inside and was shocked at what i found. This is a single output not bridge tied loiad, it’s 2ohm stable and can output 100w rms into an 8 ohm load or 200w rms into a pair of 8 ohm drivers in parallel. The low pass filters are on a daughter board and the link to the motherboard has a full range input. The only way it could have turned out better is if out was stereo lol. The attention to detail in the design even has printedmarks on through the board component/link leads to indfindicate which direction the leads should be bent over towards, presumably to avoid accidental solder bridges later on in production. First time i’ve seen that in a low price consumer devicein theory i could buy a second one of these and make a btl phase splitter daughter board and bridge two of these to get 600w rms into 4ohmspossibly 1200w peak. I did notice in my initial research that this amp is still listed on the kenwood website so it is likely it is not a discontinued model.
Have used kenwood amps off and on for many years now and while they may not be top on features they certainly do the job well and are reliable. (last amp has lasted 10 years) would recommend to anyone looking for a basic monoblock amp.

This review is from : Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power

Have used kenwood amps off and on for many years now and while they may not be top on features they certainly do the job well and are reliable. (last amp has lasted 10 years) would recommend to anyone looking for a basic monoblock amp.

This review is from : Kenwood KAC-6104D Class-D Mono Power Amplifier with 600W Max Power

I couldn’t resist taking the back off and having a peak insidevery easy to install, with plenty of power to drive my sub-woofer. Being classd it runs virtually cold to touch, so is very efficient. I believe this product is now discontinued, which is a shame. If you can get one, they are excellent value for such a good product.
I couldn’t resist taking the back off and having a peak insidevery easy to install, with plenty of power to drive my sub-woofer. Being classd it runs virtually cold to touch, so is very efficient. I believe this product is now discontinued, which is a shame. If you can get one, they are excellent value for such a good product.
Amplifiers
1
AV Link Av:link STA40-BT 150 W Mini Digital Stereo Amplifier : good item does just what’s needed

Note it is bluetooth version 2. Only had it for 4 weeks, but very good. Note it is bluetooth version 2, would like more recent version, hence only 4 star. Outputs to two speakers and you can link nearly anything with 3. 5mm jack (to rca) to it, or by …

Amplifiers
1
Bass Face DB1.1 1500W Monoblock Subwoofer Amplifier for Car : Quality at an affordable price

Been accomplishing car audio installations for four many years. . Astounding merchandise it performs amazingly and is great and compact would advise bassface goods to any one. Appears to be excellent, appears wonderful, expenses peanuts. I’d previously read this amp in a close friends car so i knew what to …

Amplifiers
1
Nad D 3020 Digital Amplfier / DAC, A remarkable amplifier.

The way ahead for the modern-day amp. The nad d 3020 is a well developed tiny powerhouse. Its 30 watts per channel, presents a super bluetooth machine constructed in,and is effective beautifully with any system i’ve connected with. Now thirty watts per channel doest seem significantly,but its far more than …