Fibaro FGK-101 Door and Window Sensor – : Looks great on anthracite doors

Motion Detectors
1

Best for receiving facts off your previous ide or sata 3. Well created and you will not will need anything else.

Quite strong and battery seems to previous forever. Incredibly durable and battery would seem to very last for good. At this time in use as portion of a z-wave doorbell set up. Its a-great deal scaled-down then i predicted (proportions stated are correct its just really hard to imagine things sometime).

Works perfectly, great range with piper, integrated li battery appears to be like like it will last without end. Does accurately what it states on the tin. Operates seriously well with piper piper nv smart residence evening eyesight protection digicam and checking with alarm and high definition movie – white – with range much better in my view than the piper encouraged identical aeotec product or service marketed by piper by themselves.Here are the specifications for the Fibaro FGK-101 Door and Window Sensor –:

  • Controlled with Fibaro System devices or any Z-Wave controller
  • Radio signal is sent each time both parts of the Door / Window Sensor separate
  • Easily mounted on doors, windows, gates, blinds
  • Compatible with DS18B20 temperature sensors
  • May be connected to a switch, via IN input

I want smartthings created them this perfectly. Ideal for use with smartthings, not only does it supply a massively greater assortment vs. The smartthings multisensor but i’ve experienced a number of for 18 months on the equipped battery and they haven’t missed a solitary defeat whereas many stms have died, experienced battery variations and long gone back again to maker. I have not encountered any problems with the design of the door. It presents temperature measurement with an additional element and by way of a product handler you can insert a switch ie a doorbell. Extremely robust and by considerably the most effective make contact with sensor obtainable for z-wave.

Good products, significantly additional responsible than the regular samsung door sensor but then does not have as several capabilities.

Reviews from purchasers :

  • I wish SmartThings made them this well
  • A great Z-Wave sensor
  • Looks great on anthracite doors

1st door sensor additional to vera lite. . Included one particular of these to my vera lite, incredibly simple to increase to your z-wave community, also additional the temperature sensor to it at the same time. The temperature sensor will healthy inside of the circumstance but possibly not the very best spot to set it as the temperature readings it returns appear a little large most of the time. The sensor alone will work terrific, set up so it turns on lights when the back door is opened at nighttime, which it has accomplished flawlessly so far, will include additional of them to the program but in all probability not the temperature readout little bit. Four stars , because it runs on batteries and as still have no plan how prolonged the batteries will past. Altered to 5 stars eleven-11-2015 nevertheless managing on the initial established of batteries and they however clearly show 70% remaining, the scene on this sensor arms it every single working day at dusk so it turns the gentle on if the door is opened still performs flawlessly, not experimented with other door sensors but would adhere with this just one primarily based on how very well it has worked and its battery life so considerably.

This a good sensor that enables you to wire it to an. This a good sensor that allows you to wire it to an exterior gadget. I have connected it to my wi-fi doobell to get instantaneous notifications to my cellphone by means of smartthings as shortly as the doorbell is pressed. Works good and matches neatly on my doorbell receiver.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Solid product, much more reliable than the standard samsung door sensor but then does not have as many features.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Solid product, much more reliable than the standard samsung door sensor but then does not have as many features.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

This a great sensor that allows you to wire it to an. This a great sensor that allows you to wire it to an external device. I have connected it to my wireless doobell to get instant notifications to my phone via smartthings as soon as the doorbell is pressed. Works great and fits neatly on my doorbell receiver.
This a great sensor that allows you to wire it to an. This a great sensor that allows you to wire it to an external device. I have connected it to my wireless doobell to get instant notifications to my phone via smartthings as soon as the doorbell is pressed. Works great and fits neatly on my doorbell receiver.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Good bit of kit especially for external temperature probe measurements. When combined with external temperature probe, it makes a very useful gadget to measure temperatures of things like hot water systems etc. A reliable device that does work with samsung smartthings when using a custom driver.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Good bit of kit especially for external temperature probe measurements. When combined with external temperature probe, it makes a very useful gadget to measure temperatures of things like hot water systems etc. A reliable device that does work with samsung smartthings when using a custom driver.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Great build quality – even the packaging was impressive. Bought this while trying to move all my home automation equipment from x10 to zwave. First impressions on this were that the sensor is tiny compared to the old x10 stuff i was replacing, and the build quality seems great, even the packaging was impressive. I wanted something that could register a contact closure so i could integrate it to the doorbell. Found instructions on the internet on ways to do this, and after half an hour with a soldering iron i now get a push notification to my iphone whenever somebody presses the doorbell, handy when i’m in the back garden and can’t hear the bell. So far the sensor has been reliable and the reported battery use has only gone down a couple of % in the past 2 – 3 months. Since my initial purchase of this one, i have purchased another 2 of them for other uses. I have one fitted to the letter box so that when mail arrives i get a phone notification, a picture is taken using the cctv camera and an led light is illuminated to give indication inside the house that mail has arrived – saves me going out into the porch and checking for mail :-)the last one i have used to monitor the temperature of the hot water tank as you can attach a ds1820 temperature sensor to it. So now i can have notifications if the boiler fails to come on etc. Obviously you need other components to be able to do all these things, but there are many possible uses for this sensor.
Great build quality – even the packaging was impressive. Bought this while trying to move all my home automation equipment from x10 to zwave. First impressions on this were that the sensor is tiny compared to the old x10 stuff i was replacing, and the build quality seems great, even the packaging was impressive. I wanted something that could register a contact closure so i could integrate it to the doorbell. Found instructions on the internet on ways to do this, and after half an hour with a soldering iron i now get a push notification to my iphone whenever somebody presses the doorbell, handy when i’m in the back garden and can’t hear the bell. So far the sensor has been reliable and the reported battery use has only gone down a couple of % in the past 2 – 3 months. Since my initial purchase of this one, i have purchased another 2 of them for other uses. I have one fitted to the letter box so that when mail arrives i get a phone notification, a picture is taken using the cctv camera and an led light is illuminated to give indication inside the house that mail has arrived – saves me going out into the porch and checking for mail :-)the last one i have used to monitor the temperature of the hot water tank as you can attach a ds1820 temperature sensor to it. So now i can have notifications if the boiler fails to come on etc. Obviously you need other components to be able to do all these things, but there are many possible uses for this sensor.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Hold the outside switch and multi-tap the internal one to. Hold the outside switch and multi-tap the internal one to pair to get piper to register opening and closing.
Hold the outside switch and multi-tap the internal one to. Hold the outside switch and multi-tap the internal one to pair to get piper to register opening and closing.
Worked great for quite a while but suddenly (possibly after the. Worked great for quite a while but suddenly (possibly after the last smartthings update) they started giving incorrect readings from my smartthings hub (eg, says closed whether open or not then suddenly works for a while and then does the same thing again so i can’t ever trust what they are saying) – its probably smartthings rather than the sensors but as i bought them for smartthings i’ve deducted a couple stars. To be honest i wish i’d paid a few more pounds and just bought the smartthings window sensors as they have additional sensors onboard other than the open/close that these have.

This review is from : Fibaro FGK-101 Door and Window Sensor – White

Worked great for quite a while but suddenly (possibly after the. Worked great for quite a while but suddenly (possibly after the last smartthings update) they started giving incorrect readings from my smartthings hub (eg, says closed whether open or not then suddenly works for a while and then does the same thing again so i can’t ever trust what they are saying) – its probably smartthings rather than the sensors but as i bought them for smartthings i’ve deducted a couple stars. To be honest i wish i’d paid a few more pounds and just bought the smartthings window sensors as they have additional sensors onboard other than the open/close that these have.
Motion Detectors
1
LightwaveRF PIR Motion Detector : Works OK, but low quality construction.

We added the pir to the lightwave range, we only have a few switches and sockets, but wanted to light up the corridor that the sparky didnt know what to do with. So my other half was sold on the idea of a pir. After a bit of messing around …

Motion Detectors
1
Panasonic Smart Home KX-HNA101 Smart Plug – : A basic start to a potentially great system

Seems to be smart and awesome, hope will work best then. Very best alarm system i at any time have had. Panasonic smart home distant. Well worth the dollars best for instant use when moving into/ leaving with out acquiring go into the phone application. Purchased when the wall keypad …